Proper books for the business, kept by themselves from what you already do in Inbecto. Every sent invoice, payment, credit note, approved expense, finalised payroll and supplier bill becomes a double entry, so the profit and loss, balance sheet, trial balance and GST position are always up to date. Supplier bills and bank statements are entered here, and your CA can lock a finished period.
Accounting is a paid add-on that works with any plan. It is for the owner and the accounts team.
The screens
Accounts
The books: profit and loss, balance sheet, trial balance, tax and who owes what.
The tabs: Reports, Checks (things worth a second look), Day book, Chart of accounts, Journal entry and Settings (with the count of documents not in the books).
The report tabs: Profit and loss, Balance sheet, Trial balance, Tax, Customers owe and We owe suppliers.
The period box: this month, a quarter, this or last financial year, or your own dates.
The cards and the report itself, by group. Press an account to open its ledger with the running balance.
Bills from suppliers, what is still owed and what was paid.
The cards: owed to suppliers, overdue, and drafts.
The filters: Owed, Drafts, Posted, Cancelled or All, and the search. Read a bill fills one in from a photo or PDF for you to check; New bill enters one by hand.
The list: supplier, bill number and date, due date, total (with TDS kept back), what is still owed and the status.
On each bill: Edit, Delete or Post a draft; Record payment or Cancel a posted one. Payments made lists every payment.
A bank statement brought in and ticked against the books.
The cards: lines still to tick, lines ticked, and the last balance in the statement.
To tick, Ticked and Set aside switch the list; Bring in a statement reads your bank's CSV, Read a PDF statement reads a PDF one, and Suggest accounts proposes the account for lines with nothing in the books.
Each line: date, narration, money in or out, the entries in the books it could be (Tick), or Make an entry and Set aside.
Subscription > Your CA: type your CA's code, choose Read the books or Keep the books, and press Connect. Or approve the request your CA sent. You can change it or end it any time.
Read the books: reports, ledgers, day book, and your invoices, payments, credit notes and expenses. Nothing can be changed.
Keep the books: also journal entries, supplier bills, bank statements and the chart of accounts.
If you have not paid for a plan yet and this CA brought you to Inbecto, tick This CA brought us to Inbecto.
Press Connect.
When your CA asks first, their firm shows under Your CA as asking for access. Choose what they may do and press Approve, or Decline.
To change or stop it, pick the other option and Save, or press End access. Ending stops their access at once. Your CA sees your books only while Accounting is part of your workspace and the books are on: see How do I get Accounting in my workspace?.
Your CA never sees your leads, quotations, projects, team or salary slips.
How do I answer my CA's requests and pay their fee notes?
Subscription > Your CA > Requests shows what your CA asked for and your questions to them; reply or mark done. Fee notes your CA sends show under their name: pay Inbecto by bank transfer, or press Pay online where it is offered.
Press Requests next to your CA. The number shows what is still open.
Each request shows who asked, what for and by when. Type a reply and press Reply, or Mark done once it is sorted.
To ask your CA something, fill in What is needed at the top and press Send.
Accounts people of your workspace see the requests too; only an administrator connects or ends a CA.
Fee notes
A fee note your CA sends shows under their name with its number and amount. You pay it through Inbecto, and Inbecto pays your CA.
Pay online: where Inbecto offers it, an administrator presses Pay online next to the fee note and pays by UPI, card or net banking. The amount is the fee note total, your CA's GST included; nothing is added. You come back to Subscription and the fee note shows as paid.
By bank transfer: ask Inbecto support (Help) for the payment details, quoting the fee note number. It shows as paid once Inbecto receives it.
The fee note itself is your bill from your CA; Inbecto sends no invoice of its own for it. Fee notes in a money other than rupees are paid by bank transfer.
I am a CA: how do I join Inbecto and connect my clients?
Sign in and open inbecto.com/ca, apply with your ICAI number, and once approved give clients your code (or ask their workspace for access). Their administrator decides what you may do.
Invited by Inbecto? Open the link in the email: it starts your sign-up with that email address and brings you to the application, with your name and firm filled in.
Sign in to Inbecto (or sign up with your work email) and open inbecto.com/ca.
Fill in your firm, your ICAI membership or firm registration number, PAN and contact details, and press Send application. We check it and write to you.
Once your firm is active, open Your firm to find your code. Copy a message for a client gives a ready message to send them.
Your client's administrator connects you from Subscription > Your CA with that code, or you press Ask for access on Clients with their workspace address (the part before .inbecto.com) and they approve it.
Your client decides whether you read the books or keep the books, and can end it any time. You never become a member of their workspace.
What you earn
A share of every plan payment of clients who say you brought them to Inbecto, for as long as they pay for Inbecto. A client with an Inbecto channel partner earns that partner, not you.
Fee notes you send clients through Inbecto, less the Inbecto fee.
Earnings wait through the refund period, then are paid to the bank or UPI on Your firm, with TDS taken off where it applies. See Money in your portal for what is due.
I am a CA: how do I work on a client's books, and give my staff clients?
Clients > Open shows the client's reports, day book, accounts, supplier bills, payments and bank, with journal entries when you keep their books. Team gives each staff member their clients; Money shows fee notes, earnings and payouts.
A client's books
Open inbecto.com/ca > Clients and press Open on a client.
The tabs are the client's own books: Reports (profit and loss, balance sheet, trial balance, tax, who owes what), Day book, Accounts, Supplier bills, Payments made and Bank. Press an account to see its ledger.
When the client lets you keep the books you also get Journal entry, and you can enter bills, bring in bank statements and add accounts.
Requests is where you ask the client for documents and they ask you questions.
If a client has no Accounting add-on, or has not switched the books on, only Requests and Fee notes open until they do.
Your staff
On Team, add people by email as Staff or Owner. Owners see every client and the money; staff see only the clients ticked under their name. Someone not on Inbecto yet joins when they sign up with that email.
Fee notes and money
Open a client > Fee notes to send them a fee note (fee before tax and your GST). Money lists your fee notes, what you earned and the payouts. An unpaid fee note can be cancelled.
Accounts > pick the date the books start (usually the first day of your financial year) > See what will be posted > Switch the books on. Every document from that date is posted as a double entry by itself.
In Books start from, pick the first day the books should cover. Usually the first day of your financial year. Anything dated earlier stays out; you enter what it left behind as opening balances.
Press See what will be posted. It counts the invoices, payments, credit notes, approved expenses and finalised payrolls from that date.
Press Switch the books on. Only a Company Admin can do this.
Inbecto sets up a chart of accounts for your country (GST accounts in India, VAT elsewhere) and posts every document from the start date. Your invoices and other documents are not changed.
Where do I see profit and loss, the balance sheet, the trial balance and GST?
Accounts > Reports: Profit and loss, Balance sheet, Trial balance, Tax, Customers owe and We owe suppliers, for the period you pick. Press any account to see its ledger.
Accounts > Journal entry: date, what it is for, then lines with an account and a debit or credit; debit must equal credit. To undo it, Day book > Reverse. Entries from documents follow their document instead.
Use a journal entry for money that is not on a document: salaries paid, a transfer between bank accounts, a loan, capital brought in, depreciation, a correction.
How do I enter opening balances and lock a finished period?
Accounts > Settings > Opening balances: what each account held when the books start, debit balances as plus and credit as minus. Locked period: nothing can be posted on or before the date; later changes to old documents post the day after.
Under Opening balances, type what each account held when the books start: cash, each bank, what customers owed, what you owed suppliers, loans, capital. Debit balances as plus (cash, bank, money owed to you), credit balances as minus (loans, money you owe, capital).
Press Save opening balances.
Any difference goes to Opening balance difference. Bring it to nothing before trusting the balance sheet. Saving again replaces the old openings.
Locked period
When a month or a year is finished (and your CA has checked it), set Locked up to and Save settings. Nothing can then be posted on or before that date, including journal entries.
If someone later changes an old invoice or expense, its correction is posted on the day after the lock, so the locked period stays as it was. Opening balances can only be changed while the books are unlocked.
Where money goes
The same page sets the cash or bank account for each way customers pay (cash, UPI, bank, cheque, card) and the expense account for each expense category. New postings follow them.
Supplier bills > New bill: supplier, bill number and dates, GST (or VAT), TDS if you deduct it, and lines with an account and the amount before tax. Save and post puts it in the books. Record payment when you pay.
Pick the supplier (from Vendors) or type a name, then the bill number, bill date and due date.
Tax: CGST + SGST for a supplier in your state, IGST for another state, or none. Outside India: VAT or none.
TDS (India): pick the section, for example 194C for contractors. The usual rate fills in; change it if your CA says so. The TDS is kept back from what you pay and owed to the government.
Add lines: the account (materials, labour, rent and so on), what it was, the amount before tax and the tax rate.
Save draft to finish later, or Save and post to put it in the books. Posting credits the supplier and claims the input tax.
Paying: on a posted bill press Record payment, pick the account it was paid from, the amount (it starts at what is still owed), date and UTR or cheque number. The bill shows what is left. Payments made lists every payment; Cancel reverses one.
A posted bill with payments cannot be cancelled: cancel the payments first.
Supplier bills > Read a bill: choose a photo or PDF of the bill. The AI fills in the supplier, GSTIN, number, dates, lines and tax; you check everything and save. Nothing is in the books until you save it.
Choose a clear photo of the bill, or its PDF (the first page is read).
The bill opens filled in: supplier (matched to your vendor by GSTIN or name), bill number, dates, CGST and SGST or IGST, and each line with its amount before tax and tax rate, on the account for its kind of expense.
Check every figure against the bill. If the printed total and the lines do not agree, the box says so.
Add TDS if you deduct it, then Save draft or Save and post.
The picture is kept with the bill: the picture button on the bill opens it later.
The AI can misread a figure or a tax rate. It never saves or posts anything by itself. Reading uses your workspace's daily AI allowance; when it is used up, enter the bill by hand.
An accounts person needs Accounts set to Add and edit for them on Team > Access to read bills, open a kept bill picture or use Suggest accounts. With View only or No access they are refused.
Can Inbecto read a PDF bank statement and suggest the accounts?
Bank > Read a PDF statement reads each page (up to 12) and brings the lines in like a CSV. Suggest accounts proposes the account for lines with nothing in the books; Make an entry starts with it, and you post.
Press Read a PDF statement and choose the PDF. Each page is read in turn (up to 12 pages).
The lines are brought in like a CSV: lines seen before are skipped.
Check the lines against the PDF: the AI can misread a figure. A CSV from net banking is always exact, so use it when your bank gives one.
Suggested accounts
Press Suggest accounts. For lines to tick that have nothing matching in the books, Inbecto proposes the account: plain rules first (bank charges, interest, salaries, cash withdrawals, GST and TDS paid, rent), the AI for the rest. The suggestion shows beside the line. Make an entry starts with it already picked; change it if it is wrong, then Post and tick.
How do I bring in a bank statement and tick it against the books?
Bank > Bring in a statement (the CSV your bank gives you). Each line shows payments in the books with the same amount and a near date: press Tick. For bank charges, interest or transfers, Make an entry. Lines seen before are skipped.
In your bank's net banking, download the account statement as CSV (or Excel saved as CSV).
Open Bank. With more than one bank account, pick the account at the top.
Press Bring in a statement and choose the file. Inbecto finds the heading row by itself (date, narration, withdrawal and deposit, or one amount column; with one amount column, a Dr/Cr or Type column beside it, or Dr after the figure, marks money out) and skips lines it has seen before.
Under To tick, each line shows entries in the books on that bank account with the same amount within a week. Press Tick on the right one.
For a line with nothing in the books (bank charges, interest, a transfer, salary paid), press Make an entry, pick the other account and Post and tick.
Set aside a line you do not want in the books. Untick or Bring back undoes either.
The Statement balance card shows the last balance in the file, to compare with the bank account's balance in the books.
Add more bank accounts in Accounts > Chart of accounts > New account, with Bank account set to Yes.
Accounting (Accounts, Supplier bills and Bank) is a paid add-on that works with any plan. An administrator buys it on Subscription > Add-ons, for a month or a year; the pages open as soon as it is paid.
Accounting is sold on top of your plan, whichever plan you are on. Until it is added, Accounts, Supplier bills and Bank say it is not part of your plan.
Under Accounts, press Buy 1 month or Buy 12 months and pay by UPI, card or net banking. GST is added when it applies, and Lywin emails the invoice.
Once it is on, an administrator switches the books on in Accounts.
Add-ons show On until the last day paid for. Add 1 month or Add 12 months adds time after that day, so nothing is lost by paying early. When it says Ask us to add it, the add-on is not sold online for your workspace yet (outside India, for one): write to Inbecto.
If the add-on ends later, everything already in the books can still be read; nothing new can be entered until it is added again.
Sent invoices, payments received, issued credit notes and refunds, approved and reimbursed expenses, finalised payrolls, posted supplier bills and supplier payments. Drafts and cancelled documents stay out. A change to a document reverses its old entry and posts a new one.
Once the books are on, these post by themselves, dated on the document:
Invoice (any status except Draft and Cancelled): the customer owes the total; sales, CGST and SGST or IGST (or VAT) and rounding are credited.
Payment received: into Cash for cash, into the bank account for everything else (change this in Accounts > Settings), out of what the customer owes.
Credit note (issued): sales returns and the tax taken back. A refund on it goes out of the bank or cash.
Expense, when approved: the expense account of its category, owed to the person who spent it (Expense claims payable). When marked reimbursed, that is paid from the bank.
Payroll, when finalised: salaries and wages, with net pay owed to staff and deductions (PF, ESI, PT, TDS) owed to the government. Paying salaries is a journal entry or an entry from the bank statement.
Supplier bill, when posted, and supplier payment: see supplier bills.
Purchase orders, work orders and stock are not posted: they are orders, not bills. Enter the supplier's bill when it comes.
When a document changes, its entry is never edited. Inbecto reverses the old entry and posts a new one, so the day book shows both. A deleted or cancelled document is reversed the same way.
Checks lists things in the books worth a second look: the same supplier bill twice, an invoice paid more than its total, the same expense twice, cash below zero, old unticked statement lines, and GST claimed without the supplier's GSTIN.
Why does Accounts say some documents are not in the books?
A document that cannot be posted is still saved, and listed with the reason, for example a VAT bill in an Indian workspace, or an account that was switched off. Fix it and press Try again.
Inbecto never stops an invoice, payment or expense from being saved because of the books. If the books cannot take it, it is listed at the top of Accounts with the reason.
Common reasons:
The books are locked up to a date and the change could not be placed after it. Move the lock or check the date.
A bill with the wrong tax, such as VAT in an Indian workspace. Edit the bill and pick GST.
An account in the settings no longer exists or is switched off. Pick another in Accounts > Settings > Where money goes.
Fix the reason, then press Try again. Each document that goes through leaves the list.